Total
117 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53157 | 1 Rosenpass | 1 Rosenpass | 2025-08-07 | 5.3 Medium |
| The rosenpass crate before 0.2.1 for Rust allows remote attackers to cause a denial of service (panic) via a one-byte UDP packet. | ||||
| CVE-2025-32366 | 1 Connman | 1 Connman | 2025-07-12 | 4.8 Medium |
| In ConnMan through 1.44, parse_rr in dnsproxy.c has a memcpy length that depends on an RR RDLENGTH value, i.e., *rdlen=ntohs(rr->rdlen) and memcpy(response+offset,*end,*rdlen) without a check for whether the sum of *end and *rdlen exceeds max. Consequently, *rdlen may be larger than the amount of remaining packet data in the current state of parsing. Values of stack memory locations may be sent over the network in a response. | ||||
| CVE-2024-53856 | 1 Rpgp | 1 Rpgp | 2025-07-12 | 7.5 High |
| rPGP is a pure Rust implementation of OpenPGP. Prior to 0.14.1, rPGP allows an attacker to trigger rpgp crashes by providing crafted data. This vulnerability is fixed in 0.14.1. | ||||
| CVE-2025-53604 | 2025-07-08 | 4 Medium | ||
| The web-push crate before 0.10.3 for Rust allows a denial of service (memory consumption) in the built-in clients via a large integer in a Content-Length header. | ||||
| CVE-2021-20588 | 1 Mitsubishielectric | 41 C Controller Module Setting And Monitoring Tool, Cpu Module Logging Configuration Tool, Cw Configurator and 38 more | 2025-06-13 | 7.5 High |
| Improper Handling of Length Parameter Inconsistency vulnerability in Mitsubishi Electric FA Engineering Software (CPU Module Logging Configuration Tool versions 1.112R and prior, CW Configurator versions 1.011M and prior, Data Transfer versions 3.44W and prior, EZSocket versions 5.4 and prior, FR Configurator all versions, FR Configurator SW3 all versions, FR Configurator2 versions 1.24A and prior, GT Designer3 Version1(GOT1000) versions 1.250L and prior, GT Designer3 Version1(GOT2000) versions 1.250L and prior, GT SoftGOT1000 Version3 versions 3.245F and prior, GT SoftGOT2000 Version1 versions 1.250L and prior, GX Configurator-DP versions 7.14Q and prior, GX Configurator-QP all versions, GX Developer versions 8.506C and prior, GX Explorer all versions, GX IEC Developer all versions, GX LogViewer versions 1.115U and prior, GX RemoteService-I all versions, GX Works2 versions 1.597X and prior, GX Works3 versions 1.070Y and prior, iQ Monozukuri ANDON (Data Transfer) versions 1.003D and prior, iQ Monozukuri Process Remote Monitoring (Data Transfer) versions 1.002C and prior, M_CommDTM-HART all versions, M_CommDTM-IO-Link versions 1.03D and prior, MELFA-Works versions 4.4 and prior, MELSEC WinCPU Setting Utility all versions, MELSOFT EM Software Development Kit (EM Configurator) versions 1.015R and prior, MELSOFT Navigator versions 2.74C and prior, MH11 SettingTool Version2 versions 2.004E and prior, MI Configurator versions 1.004E and prior, MT Works2 versions 1.167Z and prior, MX Component versions 5.001B and prior, Network Interface Board CC IE Control utility versions 1.29F and prior, Network Interface Board CC IE Field Utility versions 1.16S and prior, Network Interface Board CC-Link Ver.2 Utility versions 1.23Z and prior, Network Interface Board MNETH utility versions 34L and prior, PX Developer versions 1.53F and prior, RT ToolBox2 versions 3.73B and prior, RT ToolBox3 versions 1.82L and prior, Setting/monitoring tools for the C Controller module (SW4PVC-CCPU) versions 4.12N and prior, and SLMP Data Collector versions 1.04E and prior) allows a remote unauthenticated attacker to cause a DoS condition on the software products, and possibly to execute a malicious code on the personal computer running the software products although it has not been reproduced, by spoofing MELSEC, GOT or FREQROL and returning crafted reply packets. | ||||
| CVE-2022-3290 | 1 Ikus-soft | 1 Rdiffweb | 2025-05-21 | 7.5 High |
| Improper Handling of Length Parameter Inconsistency in GitHub repository ikus060/rdiffweb prior to 2.4.8. | ||||
| CVE-2022-3272 | 1 Ikus-soft | 1 Rdiffweb | 2025-05-21 | 7.5 High |
| Improper Handling of Length Parameter Inconsistency in GitHub repository ikus060/rdiffweb prior to 2.4.8. | ||||
| CVE-2022-41586 | 1 Huawei | 2 Emui, Harmonyos | 2025-05-14 | 7.5 High |
| The communication framework module has a vulnerability of not truncating data properly.Successful exploitation of this vulnerability may affect data confidentiality. | ||||
| CVE-2025-29784 | 1 Namelessmc | 1 Nameless | 2025-05-13 | 7.5 High |
| NamelessMC is a free, easy to use & powerful website software for Minecraft servers. In version 2.1.4 and prior, the s parameter in GET requests for forum search functionality lacks length validation, allowing attackers to submit excessively long search queries. This oversight can lead to performance degradation and potential denial-of-service (DoS) attacks. This issue has been patched in version 2.2.0. | ||||
| CVE-2021-45960 | 6 Debian, Libexpat Project, Netapp and 3 more | 10 Debian Linux, Libexpat, Active Iq Unified Manager and 7 more | 2025-05-05 | 8.8 High |
| In Expat (aka libexpat) before 2.4.3, a left shift by 29 (or more) places in the storeAtts function in xmlparse.c can lead to realloc misbehavior (e.g., allocating too few bytes, or only freeing memory). | ||||
| CVE-2024-26752 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: pass correct message length to ip6_append_data l2tp_ip6_sendmsg needs to avoid accounting for the transport header twice when splicing more data into an already partially-occupied skbuff. To manage this, we check whether the skbuff contains data using skb_queue_empty when deciding how much data to append using ip6_append_data. However, the code which performed the calculation was incorrect: ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0; ...due to C operator precedence, this ends up setting ulen to transhdrlen for messages with a non-zero length, which results in corrupted packets on the wire. Add parentheses to correct the calculation in line with the original intent. | ||||
| CVE-2024-50090 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Fix overflow in oa batch buffer By default xe_bb_create_job() appends a MI_BATCH_BUFFER_END to batch buffer, this is not a problem if batch buffer is only used once but oa reuses the batch buffer for the same metric and at each call it appends a MI_BATCH_BUFFER_END, printing the warning below and then overflowing. [ 381.072016] ------------[ cut here ]------------ [ 381.072019] xe 0000:00:02.0: [drm] Assertion `bb->len * 4 + bb_prefetch(q->gt) <= size` failed! platform: LUNARLAKE subplatform: 1 graphics: Xe2_LPG / Xe2_HPG 20.04 step B0 media: Xe2_LPM / Xe2_HPM 20.00 step B0 tile: 0 VRAM 0 B GT: 0 type 1 So here checking if batch buffer already have MI_BATCH_BUFFER_END if not append it. v2: - simply fix, suggestion from Ashutosh (cherry picked from commit 9ba0e0f30ca42a98af3689460063edfb6315718a) | ||||
| CVE-2024-43815 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: mxs-dcp - Ensure payload is zero when using key slot We could leak stack memory through the payload field when running AES with a key from one of the hardware's key slots. Fix this by ensuring the payload field is set to 0 in such cases. This does not affect the common use case when the key is supplied from main memory via the descriptor payload. | ||||
| CVE-2024-20685 | 1 Microsoft | 1 Azure Private 5g Core | 2025-05-03 | 5.9 Medium |
| Azure Private 5G Core Denial of Service Vulnerability | ||||
| CVE-2024-29064 | 1 Microsoft | 12 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 9 more | 2025-05-03 | 6.2 Medium |
| Windows Hyper-V Denial of Service Vulnerability | ||||
| CVE-2017-7645 | 4 Canonical, Debian, Linux and 1 more | 6 Ubuntu Linux, Debian Linux, Linux Kernel and 3 more | 2025-04-20 | 7.5 High |
| The NFSv2/NFSv3 server in the nfsd subsystem in the Linux kernel through 4.10.11 allows remote attackers to cause a denial of service (system crash) via a long RPC reply, related to net/sunrpc/svc.c, fs/nfsd/nfs3xdr.c, and fs/nfsd/nfsxdr.c. | ||||
| CVE-2021-38445 | 1 Objectcomputing | 1 Opendds | 2025-04-16 | 7 High |
| OCI OpenDDS versions prior to 3.18.1 do not handle a length parameter consistent with the actual length of the associated data, which may allow an attacker to remotely execute arbitrary code. | ||||
| CVE-2016-6214 | 3 Debian, Libgd, Opensuse | 3 Debian Linux, Libgd, Leap | 2025-04-12 | N/A |
| gd_tga.c in the GD Graphics Library (aka libgd) before 2.2.3 allows remote attackers to cause a denial of service (out-of-bounds read) via a crafted TGA file. | ||||
| CVE-2014-0211 | 3 Canonical, Redhat, X | 3 Ubuntu Linux, Enterprise Linux, Libxfont | 2025-04-12 | N/A |
| Multiple integer overflows in the (1) fs_get_reply, (2) fs_alloc_glyphs, and (3) fs_read_extent_info functions in X.Org libXfont before 1.4.8 and 1.4.9x before 1.4.99.901 allow remote font servers to execute arbitrary code via a crafted xfs reply, which triggers a buffer overflow. | ||||
| CVE-2015-1782 | 4 Debian, Fedoraproject, Libssh2 and 1 more | 4 Debian Linux, Fedora, Libssh2 and 1 more | 2025-04-12 | N/A |
| The kex_agree_methods function in libssh2 before 1.5.0 allows remote servers to cause a denial of service (crash) or have other unspecified impact via crafted length values in an SSH_MSG_KEXINIT packet. | ||||