Filtered by vendor Juniper Subscriptions
Filtered by product Acx7509 Subscriptions
Total 9 CVE
CVE Vendors Products Updated CVSS v3.1
CVE-2025-59967 1 Juniper 7 Acx7024, Acx7024x, Acx7100-32c and 4 more 2026-01-23 6.5 Medium
A NULL Pointer Dereference vulnerability in the PFE management daemon (evo-pfemand) of Juniper Networks Junos OS Evolved on ACX7024, ACX7024X, ACX7100-32C, ACX7100-48L, ACX7348, ACX7509 devices allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS). Whenever specific valid multicast traffic is received on any layer 3 interface the evo-pfemand process crashes and restarts. Continued receipt of specific valid multicast traffic results in a sustained Denial of Service (DoS) attack. This issue affects Junos OS Evolved on ACX7024, ACX7024X, ACX7100-32C, ACX7100-48L, ACX7348, ACX7509:  * from 23.2R2-EVO before 23.2R2-S4-EVO,  * from 23.4R1-EVO before 23.4R2-EVO. This issue affects IPv4 and IPv6. This issue does not affect Junos OS Evolved ACX7024, ACX7024X, ACX7100-32C, ACX7100-48L, ACX7348, ACX7509 versions before 23.2R2-EVO.
CVE-2024-30406 2 Juniper, Juniper Networks 13 Acx5448, Acx5448-d, Acx5448-m and 10 more 2026-01-23 5.5 Medium
A Cleartext Storage in a File on Disk vulnerability in Juniper Networks Junos OS Evolved ACX Series devices using the Paragon Active Assurance Test Agent software installed on network devices allows a local, authenticated attacker with high privileges to read all other users login credentials. This issue affects only Juniper Networks Junos OS Evolved ACX Series devices using the Paragon Active Assurance Test Agent software installed on these devices from 23.1R1-EVO through 23.2R2-EVO.  This issue does not affect releases before 23.1R1-EVO.
CVE-2024-39531 1 Juniper 7 Acx7020, Acx7024, Acx7024x and 4 more 2026-01-22 7.5 High
An Improper Handling of Values vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved on ACX 7000 Series allows a network-based, unauthenticated attacker to cause a Denial-of-Service (DoS). If a value is configured for DDoS bandwidth or burst parameters for any protocol in a queue, all protocols which share the same queue will have their bandwidth or burst value changed to the new value. If, for example, OSPF was configured with a certain bandwidth value, ISIS would also be limited to this value. So inadvertently either the control plane is open for a high level of specific traffic which was supposed to be limited to a lower value, or the limit for a certain protocol is so low that chances to succeed with a volumetric DoS attack are significantly increased.  This issue affects Junos OS Evolved on ACX 7000 Series: * All versions before 21.4R3-S7-EVO, * 22.1 versions before 22.1R3-S6-EVO,  * 22.2 versions before 22.2R3-S3-EVO, * 22.3 versions before 22.3R3-S3-EVO,  * 22.4 versions before 22.4R3-S2-EVO, * 23.2 versions before 23.2R2-EVO, * 23.4 versions before 23.4R1-S1-EVO, 23.4R2-EVO.
CVE-2024-39535 2 Juniper, Juniper Networks 8 Acx7020, Acx7024, Acx7024x and 5 more 2026-01-22 6.5 Medium
An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved on ACX 7000 Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS). When a device has a Layer 3 or an IRB interface configured in a VPLS instance and specific traffic is received, the evo-pfemand processes crashes which causes a service outage for the respective FPC until the system is recovered manually. This issue only affects Junos OS Evolved 22.4R2-S1 and 22.4R2-S2 releases and is fixed in 22.4R3. No other releases are affected.
CVE-2024-39538 2 Juniper, Juniper Networks 8 Acx7020, Acx7024, Acx7024x and 5 more 2026-01-22 6.5 Medium
A Buffer Copy without Checking Size of Input vulnerability in the PFE management daemon (evo-pfemand) of Juniper Networks Junos OS Evolved on ACX7000 Series allows an unauthenticated, adjacent attacker to cause a  Denial-of-Service (DoS).When multicast traffic with a specific, valid (S,G) is received, evo-pfemand crashes which leads to an outage of the affected FPC until it is manually recovered. This issue affects Junos OS Evolved on ACX7000 Series: * All versions before 21.2R3-S8-EVO, * 21.4-EVO versions before 21.4R3-S7-EVO, * 22.2-EVO versions before 22.2R3-S4-EVO, * 22.3-EVO versions before 22.3R3-S3-EVO,  * 22.4-EVO versions before 22.4R3-S2-EVO,  * 23.2-EVO versions before 23.2R2-EVO,  * 23.4-EVO versions before 23.4R1-S2-EVO, 23.4R2-EVO.
CVE-2024-39537 1 Juniper 7 Acx7020, Acx7024, Acx7024x and 4 more 2026-01-22 6.5 Medium
An Improper Restriction of Communication Channel to Intended Endpoints vulnerability in Juniper Networks Junos OS Evolved on ACX 7000 Series allows an unauthenticated, network-based attacker to cause a limited information disclosure and availability impact to the device. Due to a wrong initialization, specific processes which should only be able to communicate internally within the device can be reached over the network via open ports. This issue affects Junos OS Evolved on ACX 7000 Series: * All versions before 21.4R3-S7-EVO, * 22.2-EVO versions before 22.2R3-S4-EVO, * 22.3-EVO versions before 22.3R3-S3-EVO, * 22.4-EVO versions before 22.4R3-S2-EVO, * 23.2-EVO versions before 23.2R2-EVO, * 23.4-EVO versions before 23.4R1-S1-EVO, 23.4R2-EVO.
CVE-2022-22227 1 Juniper 4 Acx7100-32c, Acx7100-48l, Acx7509 and 1 more 2025-05-12 5.3 Medium
An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved on ACX7000 Series allows an unauthenticated network-based attacker to cause a partial Denial of Service (DoS). On receipt of specific IPv6 transit traffic, Junos OS Evolved on ACX7100-48L, ACX7100-32C and ACX7509 sends this traffic to the Routing Engine (RE) instead of forwarding it, leading to increased CPU utilization of the RE and a partial DoS. This issue only affects systems configured with IPv6. This issue does not affect ACX7024 which is supported from 22.3R1-EVO onwards where the fix has already been incorporated as indicated in the solution section. This issue affects Juniper Networks Junos OS Evolved on ACX7100-48L, ACX7100-32C, ACX7509: 21.1-EVO versions prior to 21.1R3-S2-EVO; 21.2-EVO versions prior to 21.2R3-S2-EVO; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R1-S1-EVO, 21.4R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved versions prior to 21.1R1-EVO.
CVE-2023-28961 1 Juniper 20 Acx1000, Acx1100, Acx2000 and 17 more 2025-02-06 5.8 Medium
An Improper Handling of Unexpected Data Type vulnerability in IPv6 firewall filter processing of Juniper Networks Junos OS on the ACX Series devices will prevent a firewall filter with the term 'from next-header ah' from being properly installed in the packet forwarding engine (PFE). There is no immediate indication of an incomplete firewall filter commit shown at the CLI, which could allow an attacker to send valid packets to or through the device that were explicitly intended to be dropped. An indication that the filter was not installed can be identified with the following logs: fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_rule_prepare : Config failed: Unsupported Ip-protocol 51 in the filter lo0.0-inet6-i fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_rule_prepare : Please detach the filter, remove unsupported match and re-attach fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_process_rule : Status:104 dnx_dfw_rule_prepare failed fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_process_filter : Status:104 dnx_dfw_process_rule failed fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_update_filter_in_hw : Status:104 Could not process filter(lo0.0-inet6-i) for rule expansion Unsupported match, action present. fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_create_hw_instance : Status:104 Could not program dfw(lo0.0-inet6-i) type(IFP_DFLT_INET6_Lo0_FILTER)! [104] fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_bind_shim : [104] Could not create dfw(lo0.0-inet6-i) type(IFP_DFLT_INET6_Lo0_FILTER) fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_update_resolve : [100] Failed to bind filter(3) to bind point fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_change_end : dnx_dfw_update_resolve (resolve type) failed This issue affects Juniper Networks Junos OS on ACX Series: All versions prior to 20.2R3-S7; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S3; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R3; 22.1 versions prior to 22.1R2.
CVE-2024-39519 1 Juniper 8 Acx7024, Acx7024x, Acx7100-32c and 5 more 2024-11-21 6.5 Medium
An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved on ACX7000 Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS). On all ACX 7000 Series platforms running Junos OS Evolved, and configured with IRBs, if a Customer Edge device (CE) device is dual homed to two Provider Edge devices (PE) a traffic loop will occur when the CE sends multicast packets. This issue can be triggered by IPv4 and IPv6 traffic. This issue affects Junos OS Evolved:  All versions from 22.2R1-EVO and later versions before 22.4R2-EVO, This issue does not affect Junos OS Evolved versions before 22.1R1-EVO.